Pleated Cone Pendant Light

Regular price $113.25
Sale price $113.25 Regular price
Unit price

About this light

Fine pleats spread outward from the fitting across a shallow conical shade. The pale surface and warm metal-tone socket give the pendant a restrained profile with a clear repeating texture.

In your room

Use the horizontal spread of the cone above a small table or within a bedside lighting plan. Plain surrounding finishes allow the pleated surface to provide the detail.

For surrounding finishes, explore our cabinet hardware and switch and wall plate finish samples to plan the room as a whole.

Technical specifications
  • Fixture type Single-light cord pendant
  • Bulb base E27
  • Light points 1
  • Bulb included No
  • Dimming Non-dimmable
  • Metal component Alloy
  • Input voltage 120 V AC
  • Connection Hardwired; plain-wire leads
Dimensions & design options
  • Shade diameter Approx. 9.45 in (24 cm)
  • Listed fixture body height Approx. 6.30 in (16 cm)
  • Listed suspension length Approx. 47.24 in (120 cm)

Dimensions are approximate and taken from supplier dimension diagrams. Inch measurements are converted from centimeters.

Installation & care

Have hardwired fixtures installed by a qualified electrician. Follow the instructions supplied with your exact fixture.

Read the lighting guide
Pale pleated cone pendant with warm metal-tone socket, side knob and softly lit lower edge.

Pleated Cone Pendant Light

Lighting questions, answered

What bulb does this light use, and is it included?

The fitting uses an E27 base. A bulb is not included. Contact us if you need to confirm the bulb voltage or maximum wattage before choosing a bulb.

Can this light be used with a dimmer?

No. This model is non-dimmable.

How is this pendant mounted?

This pendant is suspended from the ceiling and uses a hardwired connection with plain-wire leads. It is suitable for 120 V AC. Have a qualified electrician install the fixture with mounting hardware suited to the surface and the supplied installation instructions.

For general preparation and care, see our Lighting Installation & Care Guide. Follow the instructions for your exact fixture and selected option.

What are the key dimensions?

Shade diameter: approximately 9.45 in (24 cm); Listed fixture body height: approximately 6.30 in (16 cm). See Dimensions for the listed measurements and notes. All measurements are approximate.

How should I care for this light?

Dust the shade and its surface detail gently with a soft, dry cloth when the light is off and cool. Avoid abrasive cleaners and do not spray cleaning liquid onto the fixture. Contact us for finish-specific care before using a treatment or polish.

Recently Viewed Products